DLS X-A10 - analogue 1-channel 680 W amplifier
X-A10 - analogue 1-channel 680 W amplifier
X-A10 is a new nice looking analogue mono amplifier mainly designed for subwoofer use but can also be used over the whole frequency range 20 Hz to 30 kHz.
Output power in 2 ohm, RMS 300 W (340 W @14,4V, 1% THD, CEA2006)
Output power in 4 ohm, RMS 200 W (210 W @14,4V, 1% THD, CEA2006)
X-A10 is a new nice looking analogue mono amplifier mainly designed for subwoofer use but can also be used over the whole frequency range 20 Hz to 30 kHz.
Output power in 2 ohm, RMS 300 W (340 W @14,4V, 1% THD, CEA2006)
Output power in 4 ohm, RMS 200 W (210 W @14,4V, 1% THD, CEA2006)
X-DLS A20 - analogue 2-channel stereo 340 W amplifier
X-A20 is a new nice looking analogue stereo amplifier Gives out 2 x 85 RMS Watts @ 2 ohm speaker load.
Output power in 2 ohm, RMS 2x70 W (2x85 W @14,4V, 1%THD, CEA 2006)
Output power in 4 ohm, RMS 2x50 W (2x56 W @14,4V, 1%THD, CEA 2006)
Output power in 2 ohm, RMS 2x70 W (2x85 W @14,4V, 1%THD, CEA 2006)
Output power in 4 ohm, RMS 2x50 W (2x56 W @14,4V, 1%THD, CEA 2006)
DLS X-A30 - analogue 3-channel 780 W stereo amplifier
X-A30 is a new nice looking analogue stereo amplifier Gives out 2 x 85 RMS Watts @ 2 ohm speaker load on the stereo channels and 1 x 220 Watt on the mono sub channel.
Output power in 2 ohm, RMS 2 x 70 W (2x85W @14,4V, 1% THD, CEA2006)
Output power in 4 ohm, RMS 2 x 50 W (2x56W @14,4V, 1% THD, CEA2006)
Bridged 4 ohm, RMS 1 x 140 W (170W @14,4V, 1% THD, CEA2006)
Mono sub channel RMS in 2 ohm 1 x 180 W (220W @14,4V, 1% THD, CEA2006)
Mono sub channel RMS in 4 ohm 1 x 120 W (144 W @14,4V, 1% THD, CEA2006)
Output power in 2 ohm, RMS 2 x 70 W (2x85W @14,4V, 1% THD, CEA2006)
Output power in 4 ohm, RMS 2 x 50 W (2x56W @14,4V, 1% THD, CEA2006)
Bridged 4 ohm, RMS 1 x 140 W (170W @14,4V, 1% THD, CEA2006)
Mono sub channel RMS in 2 ohm 1 x 180 W (220W @14,4V, 1% THD, CEA2006)
Mono sub channel RMS in 4 ohm 1 x 120 W (144 W @14,4V, 1% THD, CEA2006)
DLS X-A40 - analogue 4-channel 780 W stereo amplifier
X-A40 is a new nice looking analogue stereo amplifier Gives out 4 x 80 RMS Watts @ 2 ohm speaker load.
In bridge mode it delivers 1 x 210 Watts or 2 x 150 Watts.
Output power in 2 ohm, RMS 4 x 70 W (4x80 W @14,4V, 1% THD, CEA2006)
Output power in 4 ohm, RMS 4 x 50 W (4x65 W @14,4V, 1% THD, CEA2006)
Bridged 4 ohm, RMS 2 x 140 W (2x150 W or 1x210W @14,4V, 1% THD, CEA2006)
In bridge mode it delivers 1 x 210 Watts or 2 x 150 Watts.
Output power in 2 ohm, RMS 4 x 70 W (4x80 W @14,4V, 1% THD, CEA2006)
Output power in 4 ohm, RMS 4 x 50 W (4x65 W @14,4V, 1% THD, CEA2006)
Bridged 4 ohm, RMS 2 x 140 W (2x150 W or 1x210W @14,4V, 1% THD, CEA2006)